Installing and Configuring SCCM 2016 – Stage 2 Installation

Now that we have covered all the prerequisites in the previous post we can now start the SCCM 2016 installation.

Using the account you created for SCCM administration launch the splash.hta file from your installation media.  Then click Install and click Next
Install-and-Configure-SCCM-2016-Part-2

Select Install a Configuration Manager primary site and click Next
Install-and-Configure-SCCM-2016-Part-2-2




Enter your licence details and click Next
Install-and-Configure-SCCM-2016-Part-2-3

Accept the terms of the licence agreements and click Next
Install-and-Configure-SCCM-2016-Part-2-4

Enter a path for the prerequisite downloads (needed if you need to exit the installation and come back to it) then click Next
Install-and-Configure-SCCM-2016-Part-2-5




The configuration files are then downloaded, click Next when this is complete
Install-and-Configure-SCCM-2016-Part-2-6

Select the languages you want available for the console and reports and then click Next
Install-and-Configure-SCCM-2016-Part-2-7

Select the languages you want available for client machines and then click Next
Install-and-Configure-SCCM-2016-Part-2-8




Choose a 3 digit site code for your Site Server and give the site a name.  Also specify the installation path and choose whether or not you want the console installed then click Next
Install-and-Configure-SCCM-2016-Part-2-9

Choose whether you want to join the site to an existing hierarchy or install a  stand-alone site.  Then click next and say Yes to the prompt.
Install-and-Configure-SCCM-2016-Part-2-10

Enter your SQL server database information, I left the database name and service broker port as the defaults and click Next
Install-and-Configure-SCCM-2016-Part-2-11

The installer correctly picked up the correct locations for the data and log directories, configure as necessary and click Next
Install-and-Configure-SCCM-2016-Part-2-12




Specify the FQDN of your site management server.  I did not need to change anything here as everything is on one server
Install-and-Configure-SCCM-2016-Part-2-13

Choose Configure the communication method on each site system role and click Next
Install-and-Configure-SCCM-2016-Part-2-14

Check Install a management point and Install a distribution point and click Next and Next again on the Diagnostic and Usage Data screen
Install-and-Configure-SCCM-2016-Part-2-15

Choose Skip this for now on the Service Connection Point Setup screen and click Next, then Click Next on the Settings Summary screen
Install-and-Configure-SCCM-2016-Part-2-16

The installer will now run some prerequisite checks, as long as you completed everything in the prerequisite guide you should only see the three warnings listed below (which we can safely ignore).  Click Begin Install
Install-and-Configure-SCCM-2016-Part-2-17

The installer will now install all the required components
Install-and-Configure-SCCM-2016-Part-2-18
Once completed review the setup log and makes sure there are no errors, then click close.




Install-and-Configure-SCCM-2016-Part-2-19
You will now be able to open the SCCM 2016 console and start using the system

Install-and-Configure-SCCM-2016-Part-2-20
This completes the SCCM 2016 setup process.




One Reply to “Installing and Configuring SCCM 2016 – Stage 2 Installation”

Leave a Reply

Your email address will not be published. Required fields are marked *